Calibrate every low-volume particulate air sampler on your deck with a single instrument, Alicat’s FP-25. A flow range of 0.1-25 lpm/slpm and pass-through sampler connections make quick work of flow checks, calibrations and audits. Humidity sensing and rapid temperature equilibration keep your readings accurate in any climate, from Anchorage to Miami.
FP-25 Brochure Go to FP-25 page.

Instantly verify sample flow rates for a wide range of gas analyzers. Conduct flow calibrations in seconds with live readings of volumetric flow. Optional totalizer averaging allows timed averages of 1000 readings per second to get reliable flow data from under-performing pumps. Extremely low pressure drop and push/pull capability makes the Alicat adept at calibrating all types of gas analyzers.
MWB Whisper Brochure Go to Portables page.

Perform a 20-point MFC flow calibration in minutes, not hours. Don’t waste another minute waiting for a positive displacement meter to finish a single low-flow measurement. Instead, save yourself hours of calibration time with Alicat’s MWB “Whisper” flow calibrator, which reads even the lowest flow rates instantly. Simultaneous display of actual volumetric flow and standardized mass flow rates makes it easy to get the information you need.
MWB Whisper Brochure Go to Portables page.

Alicat’s MWB “Whisper” flow calibrator sets up the volumetric flow controllers of VOC air sampling canisters. Ensuring the canister’s flow rate is on target for your sample set is a snap, thanks to the Alicat’s low pressure drop and live readings at very low flow rates. Whispers feature a wide 200:1 turndown for greatest exibility with varying canister sizes and sampling periods. Low pressure drop enables non-intrusive calibration of volumetric flow rates.
MWB Whisper Brochure Go to Portables page.

Accurate Readings from Anchorage to Miami

Be confident in your flow measurements, no matter the weather. Responsive temp probes and humidity sensors keep the weather in check as you monitor flow, pressure and temperature in real time. Or, collect a robust average of 5000 readings in 5 seconds.

Fast & Easy Operation for all low-vol samplers

Connect quickly to any low-volume sampler with the industry’s only pass-through PM10/PM2.5 inlet connection. Or, use the included barb fitting with face seal for no-hassle fitting changes. Rapid temperature equilibration lets you get started right away.

Durable Field Design with IP67 construction

Keep calibrating after a drop from the roof, or finish your audit if it starts to rain. This compact calibrator fits in your pocket but is built tough with an all-aluminum body, weather-resistant connections and the industry’s only lifetime warranty.
FP-25 Brochure Go to FP-25 page.

Accurate Measurements across a wide flow range

Conduct 20-point calibrations with confidence. Laminar flow technology gives the Alicat a wide operating range with accuracy that exceeds EPA requirements. Low pressure drop ensures that the meter does not interfere with volumetric flow readings.

Instant Flow Readings even at very low flows

Do a flow calibration in minutes, not hours. The Alicat saves you time by displaying real-time readings no matter the flow rate. The optional totalizer averages 1000 readings each second for a robust calibration of even the most finicky flow controllers.

Reliable Operation with no moving parts

Toss the Alicat in your kit, and leave the messy bubble juice behind. Spend your time calibrating, not supervising stuttering pistons through each flow measurement. Backed by the industry’s only lifetime warranty, an Alicat won’t let you down.
MWB Whisper Brochure Go to Portables page.