Vertical Suction Filter FHIA
| Series/CAD |
Port size |
Flow range (L/min) |
Operating
pressure |
Element μm
(Nominal filtration) |
| FHIA CAD |
1/2B to 4B |
30 to 1300 |
Negative pressure |
Micromesh:
74,105,149 |
| Features |
- Vertical suction filters are designed for installation between the pump and reservoir tank. Their main function is to protect the pump.
- Possible to detect clogging with the differential pressure indicator and differential pressure indication switch (CB-xxH).
|
Suction Filter with Case FH99
| Series/CAD |
Port size |
Flow range (L/min) |
Operating
pressure |
Element μm
(Nominal filtration) |
| FH99 CAD |
INLET: 1B to 4B |
20 to 900 |
Negative pressure |
Micromesh:
74,105,149 |
| Features |
- Compact, lightweight. Cover and case material: Aluminum casting
- Prevents the pump cavitation.
- Easy element maintenance.
- Possible to detect clogging with the differential pressure indicator and differential pressure indication switch (CB-xxH).
|
Suction Guard FHG
| Series/CAD |
Port size |
Flow range (L/min) |
Operating
pressure |
Element μm
(Nominal filtration) |
| FHG CAD |
1/2B to 3B |
18 to 450 |
Negative pressure |
Micromesh:
74,105,149 |
| Features |
- Prevents collected dust from falling into the tank.
- No need to replace flushing oil.
- Easy maintenance and no air mixing.
- Integrates a lubrication port strainer, suction filter, and air breather.
- Possible to detect clogging with the differential pressure indicator and differential pressure indication switch (CB-xxH).
|
Line Filter FH
| Series/CAD |
Port size |
Flow range (L/min) |
Operating
pressure |
Element μm
(Nominal filtration) |
| FH34 CAD |
Threaded (Rc)
3/8 to1 1/2
Flange SSA
15 (1/2B) to 80 (3B) |
10 to 600 |
3.5, 7, 14, 21 |
Paper:
5,10,20 |
| FH44 CAD |
| FH54 CAD |
| FH64 CAD |
| Features |
- Compact, solid, and safe design
- Easy element replacement.
- Easy fluid flow direction reversal.
- Possible to detect clogging with the differential pressure indicator and differential pressure indication switch (CB-xxH).
|
Vertical Return Filter FHBA
| Series/CAD |
Port size (Rc) |
Flow range (L/min) |
Element μm
(Nominal filtration) |
| FHBA CAD |
3/4 to 1 1/2 |
150,300,400 |
Paper: 5,10,20
Micromesh: 5,10,20 |
| Features |
- Vertical return filters are designed for mounting directly on top of oil tanks for hydraulic systems. They prevent dust generated within the circuit from entering the tank and help keep the oil clean. This efficient configuration reduces the total number of filters required.
- Possible to detect clogging with the differential pressure indicator and differential pressure indication switch (CB-xxH).
|
Return Filter FH100
| Series/CAD |
Port size (Rc) |
Flow range (L/min) |
Element μm
(Nominal filtration) |
| FH100 CAD |
3/4 to 3 |
Paper: 50 to 600
Micromesh: 60 to 700 |
Paper: 5,10,20
Micromesh: 74,105 |
| Features |
- Easy maintenance
- Possible to detect clogging with the differential pressure indicator and differential pressure indication switch (CB-xxH).
|
Oil Filter FH150
| Series/CAD |
Port size (Rc) |
Flow range (L/min) |
Element μm
(Nominal filtration) |
| FH150 CAD |
1/4 to 1/2 |
5 to 20 |
Paper: 5, 10, 20 |
| Features |
- Compact, lightweight. Cover material: Aluminum die-casted
- Easy maintenance
- Possible to detect clogging with the differential pressure indicator and differential pressure indication switch (CB-xxH).
|
Magnetic Separator FHM
| Series/CAD |
Applicable fluid
storage volume
(L/unit) |
Flow speed |
Fluid |
| FHM CAD |
20 to 200 |
3 m/min or less |
FHMN:
Petroleum, Water glycol,
Cutting oil, Emulsion
FHMV:
Phosphoric ester |
| Features |
- Magnetic separators protect machinery from malfunctions, reduced
precision, and burnout by adsorbing and eliminating contaminants in the fluid by means of magnetism. This helps extend the service life of hydraulic equipment.
|
Fixed Pipe Type Oil Cooler: Water Cooled / Iron Particle Type HOWF
| Series/CAD |
Heat transfer area
(Inside pipe) m2 |
Heat exchange
volume (kW) |
Flow rate (L/min) |
| Oil side |
Cooling water side |
| HOWF CAD |
0.077 to 1.28 |
5.2 to 73 |
20 to 800 |
40 to 125 |
| Features |
- High heat transfer coefficient through the effects of turbulence.
- Compact design requiring less installation space.
1/2 to 1/5 the size of conventional oil coolers.
- Flexible installation orientation.
- Minimal pressure drop.
|
Floating Pipe Type Oil Cooler: Water Cooled / Copper Particle Type HOW
| Series/CAD |
Heat transfer area
(Inside pipe) m2 |
Heat exchange
volume (kW) |
Flow rate (L/min) |
| Oil side |
Cooling water side |
| HOW CAD |
0.084 to 0.75 |
6 to 52 |
20 to 400 |
25 to 100 |
| Features |
- High heat conductivity
- Compact design requiring less installation space.
1/2 to 1/5 the size of conventional oil coolers.
- High heat exchange effectiveness due to turbulence.
- Minimal pressure drop.
|
