Lubrication Equipment

Click on the series name to display the catalog. Click on CAD to search the CAD data.


Large Flow Lubricator AL

 

Series/CAD Port size Bowl capacity (cm3)
AL800 · 900 CAD 11/4 , 11/2 , 2 440,1000
Features
  • Individual lubrication
  • Large capacity type

Auto Feed Lube, Auto Feed Tan ALF/ALT

 

Series/CAD Port size Bowl capacity (cm3)
ALF400 to 900 CAD 1/4,3/8,1/2,3/4,
1, 11/4, 11/2,2		 5000,9000
ALT CAD Tank Air: 1/4 Oil: 3/8 5000,9000
VA,VB  Oil
distributor		 φ6 Number of distribution ports:
4,6,8,10,16
Features
  • Reduces maintenance labor with an auto lubrication function.

D.P. Lube ALD

 

Series/CAD Port size Bowl capacity (cm3)
ALD600/900 CAD Single product 3/4 ,1,11/4,11/2,2 2000,5000
ALDU600/900 CAD Unit
Features
  • Centralized control of multi-point lubrication
  • Less lubricant consumption.
  • Simplified oil feeding volume setting in which only the pressure differential is adjusted.
  • Oil can be replenished by merely opening and closing the oil filler plug without stopping the air line.
  • Micromist generation can be checked from the oil filler port.

Booster Lube ALB

 

Series Port size Bowl capacity (cm3)
ALB900  Booster lube 1,2,3 5000
ALBA90  Bypass lubrication
adapter		 1/4,1/2 ---
Features
  • Centralized control of multi-point lubrication
  • Stable oil feeding with a micromist.
  • Through the use of a booster, a pressure that is higher than that of the main air passage can be supplied. This difference is used as the mist generating pressure differential. Thus, the pressure drop in the main air passage is minimized.
  • Micromist can be constantly supplied by merely adjusting the mist generating pressure differential.
  • Oil can be replenished by merely opening and closing the oil filler plug without stopping the air line.
  • Micromist generation can be checked from the oil filler port.

Mist Spray Unit LMU

 

Series/CAD Features/Functions
LMU CAD Mist spray unit
  • This consists of oil tanks and spray ON/OFF control units, which supply oil and air to the mixing valve.
LMV CAD Mixing valve
  • Adjusts the volume of air and oil supplied from the mist spray unit using built-in oil and air needles, and discharges oil mist from a nozzle.
LMH  Magnet holder
  • A mixing valve attached to the arm end can be mounted on steel parts such as machine tools, etc.
LMD  Branch pipe
  • When multiple mixing valves are used, this pipe is used to separate oil and air from the mist spray unit.

Impulse Lubricator ALIP

 

Series/CAD Port size Feeding volume/cycle
(cm3)
ALIP CAD Pressure
type		 1/8 0 to 0.04
ALT10  Oil tank Air: 1/8
Oil: 1/4		 Tank capacity: 160 cm3
ALT20  Tank capacity:
1000 cm3
Features
  • Supplies a set volume of oil just before the lubrication point. Possible to lubricate a constant volume of oil to circuits that are difficult for oil to reach, or a places with little air consumption.

If you arrive at this page via any links from search engines, click here!