Specialty Cylinders

Click on the series name to display the catalog. Click on CAD to search the CAD data.


Sine Rodless Cylinder REA

 

Type Series/CAD Action Bore size (mm)
Basic REA
CAD
3D CAD		 Double acting 25,32,40,50,63
Direct mount REAR
CAD
3D CAD		 10,15,20,25,32,40
Slider
(Slide bearing)		 REAS
CAD
3D CAD
Slider
(Ball bushing
bearing)		 REAL
CAD
3D CAD
Linear guide
(Single axis)		 REAH
CAD
3D CAD		 10,15,20,25
Linear guide
(Double axis)		 REAHT
CAD
3D CAD		 25,32
Features
  • Allows high-speed transfer of a workpiece which must avoid shock/impact.
  • Maximum speed: 300 mm/s

Sine Rodless Cylinder REB

 

Type Series/CAD Action Bore size (mm)
Direct mount REBR CAD Double acting 15,25,32
Linear guide
(Single axis)		 REBH CAD 15,25
Linear guide
(Double axis)		 REBHT CAD 25,32
Features
  • Allows high-speed transfer of a workpiece which must avoid shock/impact.
  • Maximum speed: 600 mm/s

Sine Cylinder REC

 

Type Series/CAD Action Bore size (mm)
Standard REC CAD Double acting 20,25,32,40
Features
  • Allows high-speed transfer of a workpiece which must avoid shock/impact.

Smooth Cylinder CQSY/CQ2Y/CM2Y/CG1Y/CA2Y

 

Type Series/CAD Action Bore size
(mm)		 Min. operating
pressure (MPa)
Compact cylinder CQSY
CAD 3D CAD		 Double acting 12,16 0.03
20,25 0.02
Compact cylinder CQ2Y 
3D CAD		 32,40 0.02
50,63,80,100 0.01
Air cylinder CM2Y 
3D CAD		 20,25,32,40 0.02
Air cylinder CG1Y 
3D CAD		 20,25,32,40 0.02
50,63,80,100 0.01
Air cylinder CA2Y CAD 40 0.02
50,63,80,100 0.01
Air cylinder CS2Y 
3D CAD		 125, 140, 160 0.005
Features
  • Bi-directional low-friction operation possible regardless of the direction of pressure
  • With auto switch (Series CDQSY : CDQSY, Series CDQ2Y : CDQ2Y, Series CDM2Y : CDM2Y, Series CDG1Y : CDG1Y, Series CDA2Y : CDA2Y, Series CDS2Y : CDS2Y

Low Speed Cylinder CJ2X/CUX/CQSX/CQ2X/CM2X

 

Type Series Bore size
(mm)		 Min. operating
pressure (MPa)		 Min. piston
speed (mm/s)
Air cylinder CJ2X 
3D CAD		 10,16 0.06 1
Free mount
cylinder		 CUX  10,16 0.06 1
20,25,32 0.05 0.5
Compact cylinder CQSX 
3D CAD		 12,16 0.03 1
20,25 0.025 0.5
Compact cylinder CQ2X 
3D CAD		 32,40 0.025 0.5
50,63,80,100 0.01 0.5
Air cylinder CM2X 
3D CAD		 20,25,32,40 0.025 0.5
Features
  • Stable low-speed operation even at 0.5 mm/s (1 mm/s in the case of φ16 and under)

Low Friction Cylinder / Metal Seal MQQ/MQM/MQP

 

Type Series/CAD Bore size
(mm)		 Pressure range
(MPa)		 Driving speed
(mm/s)
Standard MQQT CAD 10,16,20,25,
30,40		 0.005 to 0.5 0.3 to 300
Anti-lateral load MQQL CAD 10,16,20,25,
30,40		 0.005 to 0.7 0.5 to 500
MQML CAD 6 0.02 to 0.7 0.5 to 1000
10,16,20,25 0.005 to 0.7
High speed/
High frequency		 MQMLxxH CAD 10,16,20,25 0.01 to 0.7 5 to 3000
Single acting MQP CAD 4,6,10,16,20 0.001 to 0.7 ---
Features
  • Covers a range of driving speeds and output controls not possible with standard cylinders thanks to the metal seal structure with minimal sliding resistance.

High Power Cylinder RHC

 

Type Series/CAD Action Bore size (mm)
Standard RHC
CAD
3D CAD		 Double acting 20,25,32,40,
50,63,80,100
RHC-XC93  32,40
Features
  • Provides 10 to 20 times the energy absorption capacity of general purpose cylinder (Series CG1).
  • Smooth cushioning from high speed operation (3000 mm/s) with light loads and low/medium operation with heavy loads.
  • XC93 : With greater water resistance + stable lubrication function
  • 5 times stronger against water (liquids) than the standard model (Series RHC)

3 Position Cylinder RZQ

 

Type Series/CAD Action Bore size (mm)
Standard RZQ CAD Double acting 32,40,50,63
Features
  • Equipped with intermediate stop mechanism
  • Two-stage stroke possible with just a minute extension

If you arrive at this page via any links from search engines, click here!