FR One-Touch Fittings KR-W2
| Series |
Applicable tubing O.D. |
Connection thread |
| KR-W2 |
φ6,φ8,φ10,φ12 |
1/8,1/4,3/8,1/2 |
| Features |
- For use where weld spatter is generated./Flame resistant (Equivalent to UL-94 Standard V-0)
|
FR One-Touch Fittings Manifold KRM
| Series/CAD |
Applicable tubing O.D. |
Connection thread |
| KRM CAD |
φ6,φ8,φ10,φ12 |
1/4,3/8 |
| Features |
- For use where weld spatter is generated./Flame resistant (Equivalent to UL-94 Standard V-0)
|
Antistatic One-Touch Fittings KA
| Series/CAD |
Applicable tubing O.D. |
Connection thread |
| KA CAD |
φ3.2,φ4,φ6,φ8,φ10,φ12 |
M5x0.8,M6x1.0,
standard UNI thread
1/8,1/4,3/8,1/2 |
| Features |
- Surface resistance: 104 Ωto 107 Ω
- For preventing static electricity
- Body: Conductive resin used for seal parts
- Copper-free (Electroless nickel plated)
- UNI thread
|
Stainless Steel 316 One-Touch Fittings KQG2
| Series/CAD |
Applicable tubing O.D. |
Connection thread |
KQG2
CAD
3D CAD |
mm |
φ3.2,φ4,φ6,φ8,φ10,φ12,φ16 |
M5
R•Rc 1/8,1/4,3/8,1/2 |
| inch |
φ1/8",φ5/32",φ1/4",φ5/16"
φ3/8",φ1/2" |
UNF10-32
NPT1/8,1/4,3/8,1/2 |
| Features |
- Compact and light
- Fluid temperature: -5 to 150℃
- Material: Metal parts stainless steel 316, seal parts special FKM
- Grease-free/Can be used with steam.
Certified to meet current Food Sanitation Law standards.
|
Stainless One-Touch Fittings KQG2
| Series/CAD |
Applicable tubing O.D. |
Connection thread |
| KG CAD |
φ4,φ6,φ8,φ10,φ12,φ16 |
M5x0.8,M6x1.0,
1/8,1/4,3/8,1/2 |
| Features |
- Possible to use in corrosive conditions
- Metal parts: Stainless steel 303
|
Stainless Steel 316 Insert Fittings KFG2
| Series/CAD |
Applicable tubing O.D. |
Connection thread |
KFG2
CAD
3D CAD |
mm |
φ4,φ6,φ8,φ10,φ12,φ16 |
R•Rc 1/8,1/4,3/8,1/2 |
| inch |
φ1/8",φ5/32",φ1/4",φ5/16"
φ3/8",φ1/2" |
NPT1/8,1/4,3/8,1/2 |
| Features |
- Compact and light
- Fluid temperature: -65 to 260℃ (Swivel elbow:-5 to 150℃ )
- Material: Stainless steel 316
Rubber material is not used.(Except swivel elbow)
- Grease-free/Can be used with steam.
Certified to meet current Food Sanitation Law standards.
|
Miniature Fittings Stainless Steel 316 MS
| Series/CAD |
Applicable tubing O.D. |
Connection thread |
MS
CAD
3D CAD |
φ3.2,φ4,φ6 |
M5 |
| Features |
- Possible to use in corrosive conditions
- Compact piping space
- Hose nipple, Hose elbow, Barb
|
S Couplers Stainless Steel Type KKA
| Series/CAD |
Applicable tubing O.D. |
KKA
CAD
3D CAD |
1/8,1/4,3/8,1/2,3/4,1,11/4,11/2 |
| Features |
- Body material: Stainless steel 304
- Seal material: Fluoropolymer (Special FKM) is employed.
- Grease-free
- Check valve built in to both plug and socket
|
Clean One-Touch Fittings for Blowing KP
| Series/CAD |
Applicable tubing O.D. |
Connection thread |
KP
CAD
3D CAD |
φ4,φ6,φ8,φ10,φ12 |
1/8,1/4,3/8,1/2 |
| Features |
- One-touch fittings for clean room blowing systems
- Completely oil-free (Fluoro coated rubber portions)
- Wetted parts are non-metallic.
- Parts washed and assembled in a clean room, packed in a duplicate package.
- Can be used in a vacuum (-100 kPa).
|
Clean One-Touch Fittings for Driving Air Piping KPQ/KPG
| Series |
Applicable tubing O.D. |
Connection thread |
| KPQ |
φ4,φ6,φ8,φ10,φ12 |
M5,1/8,1/4,3/8,1/2 |
| KPG |
| Features |
- One-touch fittings suitable for drive air systems in clean room environments
- Resin parts: Polypropylene
- All metal portions:
Brass (Electroless nickel plated) KPQ
Stainless steel (Stainless steel 304) KPG
|
Fluoropolymer Fittings Hyper Fitting LQ1
Insert Bushing Type
| Series/CAD |
Maximum operating pressure |
Operating temperature |
| LQ1 CAD |
1.0 MPa |
0 to 200 ºC |
Fluoropolymer Fittings Hyper Fitting LQ3
Flare Type
| Series/CAD |
Maximum operating pressure |
Operating temperature |
| LQ3 CAD |
1.0 MPa |
Nut material PVDF:
0 to 150ºC
Nut material PFA:
0 to 200ºC |
Low Torque Rotary Joint MQR
Flare Type
| Series/CAD |
No. of circuits |
Port size |
Operating pressure |
MQR
CAD
3D CAD |
1,2,4,8,12,16 |
M5x0.8 |
-100 kPa to 1 MPa |
| Features |
- Metal seal type.
- Air suppy to rotary/pivot shafts of turntables and robot arms.
- Low rotational torque: 0.003 to 0.50 N·m or less.
- Operating temperature: -10 to 80 ºC
- Allowable RPM: 200 to 3000 min-1 (r.p.m)
|
