Adsorption Plate SP
| Series/CAD |
Features |
| SP CAD |
- Ideal for adsorption and fixing in place of thin sheets, glass panels, and soft workpieces. Workpieces do not deform since they are adsorbed with multiple micro air vents on the adsorption surface.
- A high level of machining accuracy.
- Strong adsorption force.
|
Free Mount Cylinder for Vacuum ZCUK
| Series/CAD |
Features |
ZCUK
CAD
3D CAD |
- In the rectangular, compact cylinder series CU which has a high level of mounting precision, a vacuum passage is provided in the rod to facilitate the mounting of a vacuum pad and to save space.
- Standard vacuum pads (φ2 to φ50) can be mounted.
|
Drain Separator for Vacuum AMJ
| Series/CAD |
Features |
| AMJ CAD |
- Removes water droplets from air by simply installing in vacuum equipment connection lines.
- Effective for removing water droplets form the air sucked into vacuum pumps and ejectors, etc.
|
Exhaust Cleaner for Vacuum AMV
| Series |
Features |
AMV
3D CAD |
- Captures 99.5% of oil mist exhausted form the vacuum pump.
- Creates a comfortable working environment without oil mist.
- Captures and separates 99.5% of highly concentrated oil mist with a low flow rate.
- No need for exhaust ducts from the vacuum pump.
|
Liquid Collector / Exhaust Pressure Type AEP100
| Series |
Features |
| AEP CAD |
- Collect and reuse the leaked lubricating oil or hydraulic fluid using exhaust pressure.
- Collect it using the exhausted air released from the switching valve into the atmosphere, realizing energy saving.
- Efficient operation eliminating collection and wiping by hand.
|
Liquid Collector / Ejector Type HEP500
| Series |
Features |
| HEP500 CAD |
- Collects the leakage of expensive cutting and grinding oil.
- No need to collect the leaked liquid by hand.
- Possible to use the equipped pump, special driving force is not required.
|
Vacuum Regulator IRV
| Series/CAD |
Port size |
Set pressure (kPa) |
IRV10
CAD
3D CAD |
φ6, φ8, φ1/4, φ5/16 |
-100 to -1.3 |
IRV20
CAD
3D CAD |
φ6, φ8, φ10, φ1/4, φ5/16, φ3/8 |
| Features |
- Allows adjustment of vacuum line pressure.
- Single sided connections series
- Mass reduced by 20%(Compared with the existing IRV2000 with IRV20 fitting)
Built-in One-touch fittings
- Easy to attach/detach the pressure gauge or digital pressure switch due to attachment by clip.
- Mounting direction of the pressure gauge or digital pressure switch can be changed. (Standard connections only)
- Mounting angle of the pressure gauge or digital pressure switch can be changed easily (in 60 degree increments).
|
Electronic Vacuum Regulator ITV
| Series/CAD |
Port size |
Set pressure |
ITV009
3D CAD |
Built-in One-touch fitting
φ4, φ5/32 |
-1 to -100 kPa |
ITV209x
CAD
3D CAD |
1/4 |
-1.3 to -80 MPa |
| Features |
- Stepless control of vacuum pressure in proportion to electric signals
- Communication: CC-Link, DeviceNetTM, PROFIBUS DP, RS-232C
|
Related Equipment for Vacuum System
