Linear Guide Parallel Style Air Gripper MHZx2
| Type |
Series/CAD |
Cylinder bore size
(mm) |
| Compact |
MHZA2-6
CAD
3D CAD |
6 |
Compact,
with dust cover |
MHZAJ2-6
3D CAD |
6 |
| Standard |
MHZ2
CAD
3D CAD |
6,10,16,20,25,32,40 |
| Long stroke |
MHZL2
CAD
3D CAD |
10,16,20,25 |
| With dust cover |
MHZJ2
CAD
3D CAD |
6,10,16,20,25 |
| Features |
- Linear guide improves rigidity and accuracy.
- Dustproof and drip-proof construction
- Dust cover material selectable
|
Cross Roller Guide Parallel Style MHQx2
| Series |
Cylinder bore size
(mm) |
| MHQG2 |
32,40 |
| MHQJ2 |
10,16,20,25 |
Low Profile Air Gripper MHF2
| Series/CAD |
Cylinder bore size
(mm) |
MHF2
CAD
3D CAD |
8,12,16,20 |
| Features |
- Reduces the height to approx. 1/3 of the standard gripper
- Reduces the moment generation with its low profile design
- Short, middle and long strokes are available.
- Compact, but a strong gripping force with the double piston mechanism
|
Wide Type Air Gripper MHL2
| Series/CAD |
Cylinder bore size
(mm) |
MHL2
CAD
3D CAD |
10,16,20,25,32,40 |
| Features |
- Long strokes
- Ideal for holding large-size workpieces that have dimensional variances.
- The double pistons provide a large amount of gripping force.
- Built-in dust-protection mechanism
|
Rotary Actuated Air Gripper 2-Finger Type MHR2/MDHR2
| Series/CAD |
Cylinder bore size
(mm) |
MHR2
CAD
3D CAD |
Nominal size 10, 15, 20, 30 |
MDHR2
CAD
3D CAD |
| Features |
- A vertically compact configuration has been achieved
through the use of a rotary actuator as the drive force source.
- Repea
tability: ±0.01 mm
- Supports class 10 clean room.
|
Rotary Actuated Air Gripper 3-Finger Type MHR3/MDHR3
| Series/CAD |
Cylinder bore size
(mm) |
MHR3
CAD
3D CAD |
Nominal size 10, 15 |
| MDHR3 CAD |
| Features |
- A vertically compact configuration has been achieved
through the use of a rotary actuator as the drive force source.
- Repea
tability: ±0.01 mm
- Supports class 10 clean room.
|
Wedge Cam Operation Slide Guide Air Gripper MHK2
| Series/CAD |
Cylinder bore size
(mm) |
MHK2
CAD
3D CAD |
12,16,20,25 |
MHKL2
CAD
3D CAD |
| Features |
- Wedge shaped cam driving mechanism
- High rigidity with a slide type guide
- A dust-proof, drip-proof, external force resistant, and environmental resistant type that can be used for a variety of applications.
- To suit the environment, a selection of dust cover materials (chloroprene rubber, fluororubber, silicon rubber) or stainless steel (SUS304) fingers is available.
- Long strokes selectable.
|
Slide Guide Round Body Air Gripper 2-Finger Type MHS2
| Series/CAD |
Cylinder bore size
(mm) |
MHS2
CAD
3D CAD |
16,20,25,32,40,50,63 |
| Features |
- Vertically compact, lightweight due to the wedge shaped cam construction.
- Ideal for operations which external force is applied to, such as press fitting operations.
- Repeatability: ±0.01 mm
|
Slide Guide Round Body Air Gripper 3-Finger Type MHS3
| Type |
Series/CAD |
Cylinder bore size
(mm) |
| Standard |
MHS3
CAD
3D CAD |
16,20,25,32,40,50,63,80
100,125 |
| With dust cover |
MHSJ3
CAD
3D CAD |
16,20,25,32,40,50,63,80 |
| Through hole |
MHSH3
CAD
3D CAD |
With dust cover +
Through hole |
MHSHJ
3D CAD |
| Long stroke |
MHSL3
CAD
3D CAD |
16,20,25,32,40,50,63,80
100,125 |
| Features |
- Vertically compact, lightweight due to the wedge shaped cam construction.
- Ideal for operations which external force is applied to, such as press fitting operations.
- Repeatability: ±0.01 mm
- Long stroke type: Strokes two times longer than the standard type
- Gripping of cylindrical workpieces
- Reliable removal of the workpiece with through-holes and a centerpressure.
|
Slide Guide Round Body Air Gripper 4-Finger Type MHS4
| Series/CAD |
Cylinder bore size
(mm) |
MHS4
CAD
3D CAD |
16,20,25,32,40,50,63 |
| Features |
- Vertically compact due to its wedge shaped cam construction.
- Optimally holds rectangular workpieces for positioning operations.
- Repeatability: ±0.01 mm
- Positioning of rectangular workpieces.
|
Angular Style Air Gripper Compact Type MHC2
Angular Style Air Gripper Standard Type MHC2
| Series/CAD |
Cylinder bore size
(mm) |
MHC2
CAD
3D CAD |
10,16,20,25 |
| Features |
- A large holding moment is achieved through a double piston construction.
- Integral variable throttle
|
Toggle Type Air Gripper MHT2
| Series/CAD |
Cylinder bore size
(mm) |
MHT2
CAD
3D CAD |
32,40,50,63 |
| Features |
- New cylinder body allows small auto switches to be mounted on 4 surfaces.
- Strong and stable gripping force can be obtained through the toggle mechanism.
- Holds workpiece even when the air is shut down. (Safety measures)
|
180º Angular Style Air Gripper Cam Style MHY2
| Series/CAD |
Cylinder bore size
(mm) |
MHY2
CAD
3D CAD |
10,16,20,25 |
| Features |
- Lightweight and compact through the use of a cam mechanism.
|
180º Angular Style Air Gripper Rack & Pinion Style MHW2
| Series/CAD |
Cylinder bore size
(mm) |
| MHW2 CAD |
20,25,32,40,50 |
| Features |
- A unique seal construction resulting in shortened overall length and dust proofing countermeasures allow it to be used for removing workpieces from machine tools or for holding workpieces.
|
Rotary Gripper MRHQ
| Series/CAD |
Cylinder bore size
(mm) |
MRHQ
CAD
3D CAD |
10,16,20,25 |
| Features |
- The gripper function and the rotation function have been integrated in a compact package.
- Possible to grip and reverse the workpiece in conveyor lines with a single unit.
- Rotation range and angle adjustable.
|
AHC System / Auto Hand Changing System MA
| Series/CAD |
Positioning |
Action |
| MA210 CAD |
Ball coupling |
Single acting |
| MA310 CAD |
| MA311 CAD |
Double acting |
| MA320 CAD |
Curved coupling |
Single acting |
| MA321 CAD |
Double acting |
| Features |
- The robot hand tools change automatically to accommodate workpieces of different shapes, thus making it possible to adopt the FMS (flexible manufacturing system) in the assembly line.
|
