Valves Coolant

Coolant solenoid valve provides the perfect solution for high speed machining and is available as solenoid or air operated. Features like a scraper, squeeze seal, grease channel and dry bearing construction, increases the valves service life.

2 Port Valve, Low Power Consumption

The Series SGC coolant valve provides the perfect solution for high speed machining and is available as solenoid or air operated. Due to the SGC’s unique scraper, squeeze seal, grease channel and dry bearing construction, the valve’s service life will exceed 5 million cycles. The introduction of a built-in magnet allows auto switches to be fitted, enabling confirmation of whether the valve is open or closed.

2/3 Port Valve, High Pressure

The SGH 2 port high pressure coolant valve for coolant liquid (up to 3MPa/7MPa) is ideal for lubrication, dust blowing and cooling. It is available as solenoid and air operated the flow rate ranges from Cv of 1.8 to 6.5.

2 Port Valve for Machine Tool Coolant

The VNC series is for controlling the cutting oils and coolants used in machine tools. Both air operated and external solenoid operated are available as normally closed and normally open operation.

2 Port Valve for Machine Tool Coolant, High P-L-H6

The VNH series is a 2/3 port valve for controlling high pressure (up to 3.5 MPa or 7.0 MPa) cutting oils and coolants used in machine tools.

Valves Coolant

2 Port Valve, Low Power Consumption

2/3 Port Valve, High Pressure

2 Port Valve for Machine Tool Coolant

2 Port Valve for Machine Tool Coolant, High P-L-H6

Configuration: Part Number